Getting Started; Using The Stylus - Steren GPS-400 Manual De Instrucciones

GETTING STARTED

If you are a first-time system user, the following explanations will help
you to quickly understand the system operations, and experience the
system's powerful and convenient functions.
SD memory card installation
This unit is equipped with a SD memory card slot; you can purchase SD
(Secure Digital) Cards to expand the memory capacity.
To insert the memory card:
With the metal contacts of the memory card facing back, insert the card
into the slot on the right side of the unit.
To remove the memory card:
1. Gently press the top of the memory card, and the card will eject
automatically.
2. Then pull to remove the memory card.
ENGLISH-22
The included memory card contains the digital map files that are
required for the GPS navigational data. Please do not delete.
When removing the memory card, please make sure the card is not
reading data, or it will cause a system crash.
Do not set the SD memory card as write protected, or the system
will not operate properly.
When operating, accidental removal of the memory card will result
in showing an error message. Please reinsert the memory card and
the system may need to be reset before further use.
ENGLISH-23

USING THE STYLUS

This unit can be controlled easily though the touch screen. The stylus is
an assist tool for operating this unit and is concealed in a pen slot at the
rear. Pull out to use.
ENGLISH-24