Kohler K-7344 Manual De Instrucciones página 4

Valve Body
Inlet
Handspray
Hose Outlet
3" (7.6 cm)
or Larger
2. Connect the Supplies
CAUTION: Risk of restricted waterflow and product
damage. Use extreme care to avoid kinking and twisting the
supply hoses. Hoses must not be taut after installation.
Install two 3/8" supply tees with supply stops below the
mounting surface. Ensure the supply tees do not interfere with
items below the sink.
NOTE: If the supply hoses must be coiled, maintain an inside coil
diameter of at least 3" (7.6 cm).
Connect and tighten the supply hoses to the supply tees.
Feed the spray hoses with handspray through the assembly until
the handspray is properly seated.
Connect and tighten the handspray hose outlet to the valve body
inlet.
1069077-2-A
Handspray
Spray Hose
Valve Body
3/8" Supply
Tees with
Supply Stops
Supply
Hoses
4 Kohler Co.