Noise And Vibration; Declaration Of Conformity - Felisatti SCF184/1400 Instrucciones De Servicio

recommend that every other time you take a tool to
an after sales service center for carbon brushes re-
placement you also order a general maintenance
(cleaning and lubrication).
- Use only Felisatti accessories and spares. Parts
the changing of which is not covered in this instruc-
tion manual, should be replaced in a Felisatti Offi-
cial Service Centre.
Do not dispose of electric tools in
the household waste!
In accordance with European Directive 2002/96/EC
relating to old electrical and electronic appliances and
its translation into national law, used electric tools must
be collected separately and recycled in an ecologically
desirable way.
WARRANTY
See general warranty conditions printed on the attached
sheet.

NOISE AND VIBRATION

This tool has been designed and made to reduce noise
to a minimum. However, in spite of this, in certain
circumstances the maximum noise level in the place
of work could exceed 85 dBA. In this case, the ope-
rator should wear ear protection.
The machine's noise and vibration levels, measured in
compliance with EN60745-1, usually reach:
Acoustic pressure = 96 dB(A)
Sound-power level = 109 dB(A)
Use ear protection!
Vibration acceleration = 2.9 m/s

DECLARATION OF CONFORMITY

We hereby declare, under our sole responsibility,
that the FELISATTI brand products described in
this manual SCF184/1400 comply with the follow-
ing standards or standard documents: EN60745-
1:2008, EN55014-1:2006+A1,
2:1997+A1+A2, EN61000-3-2:2006+A1+A2 and
EN61000-3-3:2008 in accordance with EU Direc-
tives 2006/42/EC, 2006/95/EC, 2004/108/EC and
2002/95/EC.
12
Jordi Carbonell
Plant Mgr.
We reserve the right to make technical changes 09/2012
2
EN55014-
Santiago López
Marketing Mgr.