Tools Required; Mounting Options; Installing Your Fan - Progress Lighting AirPro P2556 Instrucciones De Instalación

Tools Required

Phillips screw driver or straight slotted screw
driver, adjustable wrench, step ladder, and
wire cutters.

Mounting Options

If there isn't an existing electrical box, then
read the following instructions. Disconnect
the power by removing fuses or turning off
circuit breakers.
Secure the electrical box directly to the building
structure. Use appropriate fasteners and
building materials. The electrical box and
its support must be able to fully support the
moving weight of the fan (at least 35 lbs.).
Do not use plastic electrical boxes.
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PERSONAL INJURY,
TO OUTLET BOX MARKED "ACCEPTABLE
FOR FAN SUPPORT OF 35LBS. (15.9 KG) OR
LESS", AND USE SCREWS PROVIDED WITH
THE OUTLET BOX. ELECTRICAL
COMMONLY USED FOR
OF LIGHTING FIXTURES
ACCEPTABLE FOR FAN SUPPORT
MAY NEED TO BE REPLACED. CONSULT A
QUALIFIED ELECTRICIAN IF IN DOUBT.

3. Installing Your Fan

Figures 1, 2, and 3 are examples of different
ways to mount the electrical box.
MOUNT
BOXES
THE SUPPORT
MAY NOT BE
AND
Note: You may need a longer downrod to
maintain proper blade clearance when installing
on a steep, sloped ceiling. The maximum
allowable angle is 30˚.
Figure 1
To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Figure 4.
Figure 2
Figure 3
Figure 4