Care And Cleaning - Rampage 86654 Instrucciones De Instalación

To LOWER Load:
• IMPORTANT The jack must be loaded with a minimum 110lbs (50kg) to lower step
by step, otherwise the mechanism will drop.
• Using the handle, lift the load slightly. Move the Reversing Latch into the DOWN
position (Figure 2).
• Keeping a firm grip, cycle the handle through the range of motion.
• When the load has lightened beyond 110lbs, the jack will release and drop to the
base.
Jack Handle Isolator
• The Jack Handle Isolator is designed to help secure the handle to the jack when
not in use. Be sure to use the isolator to avoid accidental unwanted movement of the
handle.
Isolator Installation:
See Figure 3
• Temporarily remove the top clamp from the top of the Off-Road Jack.
•Slide the isolator onto the center steel bar and then onto the end of the handle.
• Reinstall the top clamp to the center steel bar.

Care and Cleaning

• Rampage products are built to last; regularly clean, lubricate and inspect your Off-Road Jack.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International, Inc. We take the utmost pride
in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your
product is top quality in terms of fit, durability, finish and ease of installation.
800-241-7219 • Visit us at Rampageproducts.com
Rampage Products is a trademark of Lund International, Inc
Page 2 of 6
Figure 2 - To Lower
Figure 3 - Isolator Install