Grundig RCD 1500 BT Manual De Instrucciones página 28

MP3­MODE­__________________________________
Creating­a­track­memory
You can store and then play back up to 20 titles from
various albums on the disc or USB memory stick in a set
order. A track may be stored more than once. Program
is only possible in the stop position.
Selecting­and­storing­files
1 Press »PROG/MEM/STOP­
tion.
– Display: »P01« for the first preset position, »MEM«
icon flashes.
2 Select the album by pressing
DOWN« or »ALBUM­MEMORY­UP«.button
3 Select the file you want by pressing
»UP­ «.
4
Press »PROG/MEM/STOP­« to save the file.
– Display: »P02« for the second preset position,
»MEM« in display flashes.
5 To save more files, repeat steps
Playing­back­titles­in­random­order­
(Random)
1
In stop mode, keep pressing »MODE/MONO/ST«
until »RND« appears in the display.
2
Press »PLAY/PAUSE« to start random playback.
– All tracks on the CD are played back once in ran-
dom order.
3
To terminate the function, press
ST« again.
Playing­back­a­track­memory
1 Start the track memory by pressing
PAUSE«.
– Playback begins with the first programmed file.
2 Press »PROG/MEM/STOP­
playback.
3 To play the track memory again, press
»PROG/MEM/STOP­« button and afterwards
»PLAY/PAUSE«.button
Changing­the­file­selection
1 In stop mode, keep pressing
« until the program number you want to replace ap-
pears in the display.
28­
ENGLISH
« to call up the func-
»ALBUM­MEMORY­
»DOWN­ « or
2 to 4.
»MODE/MONO/
»PLAY/
« button to end
»PROG/MEM/STOP­
2
Select the number of the new file or track by pressing
»DOWN­ « or »UP­
3 Press »PROG/MEM/STOP­« to save the new file
or track.
Adding­files
1
In stop mode, keep pressing
« button until the last program is shown in the display.
2 Select the number of the new file by pressing
»DOWN­ « or »UP­
3 Press »PROG/MEM/STOP­
file.
Deleting­the­track­memory
The device must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD compart-
ment;
or
press and hold »PROG/MEM/STOP­
while programming.
«.button
»PROG/MEM/STOP­
«.button
« button to save the
« button