How To Load - EDM Product 07599 Manual Del Usuario

REF. 07599
SPECIFICATIONS AND PARAMETERS
Rechargeable Electric Hair cutter
Special power adaptor

HOW TO LOAD

- Ensure that the power button is lowered. It is not allowed to charge the
device when it is turned on.
- Insert the connector into the hair cutter.
- Connect the charger to the power adapter (the light will come on).
- It takes 8 hours for a full charge. The hair cutter, once charged, can be
used for more than 45 minutes.
Note: Please charge for 10 hours if it is the first use after purchase or if it has
been stopped for more than half a year (to activate the battery). The light
indicator may not come on if the battery is completely depleted, it will turn
on after a few minutes.
AFTER LOADING
- Disconnect the charger from the power adapter.
- Disconnect the jack-type connector from the device.
- Please hold the Jack-type connector when disconnecting, if you pull the
cord it may cause damage to the charger.
HOW TO USE THE HAIR CUTTER
- Insert the Jack-type connector into the device and the charger into the
power adapter.
- Turn on the device for use.
- Turn off the appliance after use and disconnect the charger from the
power adapter. If the battery is dead, it may be difficult to turn on the
appliance. You should charge it for a few minutes. It is normal for the
charger and the appliance to emit heat during charging.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD / INSTRUÇÕES IMPORTANTES
DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
Work voltage: 2,4V
Electric motor
Work current: 600-800mA
Special voltage: 2,4V
Battery
Charge time: 8 horas
In: 220/240V
Out: 3V 600mA