Monti BRISTLE BLASTER Instrucciones página 21

Bristle Blaster Electric Operating instructions ENG
®
Correct direction of Less contact pressure = longer service Observe the correct working position!
operation life and higher performance
Holding machine
Angle machining
If the tool does not work correctly, check the following:
Are you using a suitable Bristle Blaster Belt for the surface to be machined? – Use the most suitable Bristle
®
Blaster Belt.
®
Is the tool operating at the stipulated speed? – Problems with the tool, see section 8, Troubleshooting.
Are you using an Bristle Blaster Belt with the wrong direction of travel? – Fit the brush belt such that is runs in the
®
correct direction (see section 5, Placing in operation, Fig. 2).
Is the Accelerator Bar showing signs of wear? Check the Accelerator Bar. In case of wear, rotate by
approx. 45° or renew.
21