Digital Setup - Steren CAR-660 Manual De Instrucciones

AUDIO
Audio output
Use this menu you can chose the audio output mode from Analog /
Digital to SPDIF / RAW or SPDIF / PCM.
SPDIF / OFF
Analog or digital outputs have not output signal
SPDIF / RAW
If you have connected the car stereo to a power amplifi er
through an analog or optical cable, choose this option. If the
disk is recorded in Dolby Digital, DTS or MPEG, the audio
output signal will be the same as the digital signal (RAW
format) from the disc. At the same time, the power amplifi er
must have the Dolby Digital, DTS or MPEG decode function.
SPDIF / PCM
If the equipment is connected to a power amplifi er with 2
channels, choose this option.
If the CD to play is recorded in Dolby Digital or MPEG, the
digital or analog output will be modulated to listen it in two
channels through PCM format.
Key
This options allows you to select key up and down according to your
needs
VIDEO
Use this option to set the Brightness, Contrast, Hue, Saturation and
Sharpness.

DIGITAL SETUP

Allows you to change the Operation Mode, Dynamic Range and Dual
mode.
MIXED-DISC OPERATION
While you are playing mixed discs which contain MP3, WMA, JPG o
DivX fi les, just load it into the car stereo and a menu will display in the
right side of the screen.
Automatically, the unit will play the audio fi les. However, you can use the
navigation buttons to select the type of the fi le you want to play.
Audio Mode
If there are audio fi les in the CD, they will be played automatically when
you load the CD.
MP3 and WMA fi les are supported. Use the navigation buttons and the
Enter button to choose a directory or a fi le. The left column will display
ENGLISH-13