Publicidad
Warning:
1. This tool should only be used as a hand operated tool. It is powered by compressed air and is not insulated against electric shock.
2. This tool is specially designed for riveting sheet metals together. Any application or use of this tool other than what it is designed for is strictly
prohibited.
3. High sound levels may cause hearing damage. Always wear hearing protection when operating this tool.
4. Wearing eye/face protection can reduce the danger of high-speed materials being ejected from tool use.
5. User must wear proper clothing. Loose clothing, long hair, stings, straps, belts and jewelry should not be worn when operating this tool.
6. Make sure that the all the specifications of the rivets to be used are compatible with this tool.
7. Check the protection against the ejecting of rivet stem in place and is operative.
8. Make certain to stand on a solid or firm location and keep body in well-balanced position while operating this tool.
9. Always turn off the air supply and disconnect the air hose before changing rivet nose or making adjustments on this tool.
10.Release the throttle lever to avoid danger if there is a failure of energy supply or when connecting or disconnecting the air hose.
11.Prolonged use will cause user fatigue. Periodic breaks are recommended for user safety.
12.It is recommended to stop operating the tool whenever the user experiences discomfort, tingling or pain during use.
13.Beware if the compressed air hose breaks unexpectedly, or is being connected or disconnected improperly. This whipping action may cause
injury.
Maintenance:
1. Disassemble and clean all the components inside the front housing with pressured air.
2. Take the piston assembly apart from the air cylinder, clean and apply some pneumatic oil to both piston and cylinder walls.
3. Rehabilitate the tool by assembling everything back reversely.
4. Refer to the supplied parts list to perform the proper maintenance process before using this tool.
5. Repeat the same process periodically for regular tool maintenance.
6. Follow all the recycling laws of waste disposal once this tool is no longer usable.
Instructions for selecting proper jaw housing on item # PA-201.
Large jaw housing assembly
PA-201P03, P04 & P05
Large jaw housing
2
Small jaw housing assembly
PA-201P03A, P04A & P05A
Small jaw housing
These two different housings are easy to be
identified by the internal diameters. Both of them
are supplied together with each PA-201.
To prevent premature failure of the housing, the
operator is required to use the proper jaw housing
based on the rivet size being used.
To prevent premature failure of the housing, the
operator is required to use the proper jaw housing
based on the rivet size being used.
Reference:
1. The large jaw housing assembly includes
components PA-201P03, P04 & P05.
This is suitable for rivet sizes of 6.4mm, 6.0mm or
4.8mm.
2. The small jaw housing assembly includes
components PA-201P3A, P4A & P5A.
This is suitable for rivet sizes of 4.0mm, 3.2mm or
2.4mm.
Publicidad
