ETI COLOR PREFERENCE DL-3-45-902-SV-D Manual De Uso Y Cuidado página 5

Installation (continued)
4
Positioning the electrical box
□ Place the electrical box (B) through the cut-out hole
in the ceiling and position it where desired.
NOTE: The electrical box (B) must be no more than
22 inches from the edgelit downlight based on the
length of the connector cables.
A
6
Positioning the LED downlight
□ One at a time, flip the clips on the LED downlight (A) up and
insert into the opening in the ceiling.
□ Once both clips are inside the cut-out, gently push the LED
downlight (A) upward until the trim is flush with the ceiling
surface.
NOTE: Select the preferred color temperature of the light
before inserting the LED downlight (A) into the ceiling opening.
7
Activating the LED downlight
□ Restore power at the electrical panel.
□ Turn on the light switch to activate the fixture.
5
□ Plug the male connector from the electrical box (B) into the
□ Twist the two parts of the connector in opposite directions to
B
A
5
Connecting the electrical box
to the LED Downlight
female connector from the LED downlight (A).
lock them together.
A
Please contact 1-855-384-7754 for further assistance.
B
Connector
www.ETiSSL.com