Descargar Imprimir esta página

Chamberlain Group MyQ SMART GARAGE Hub Manual Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

DOOR SENSOR COMPATIBILITY
Compatible with:
MyQ Smart Garage Hub models MyQ-G0301 and 821LMB.
NOT compatible with:
MyQ Garage models MyQ-G0201 and 821LM.
Visit www.LiftMaster.com/door-sensor or
www.chamberlain.com/door-sensor for more information.
INSTALL THE DOOR SENSOR
Install with Fastening Strips
1. Remove the pull tab from the door sensor to activate the
battery.
2. Position the door sensor vertically and attach to a clean,
dry location on the top panel of the garage door with
fastening strips (provided).
OR
Install with Screws
1. Remove the pull tab from the door sensor to activate the
battery.
2. Press in the bottom of the door sensor and remove the
front cover.
3. Position the door sensor vertically and attach to the top
panel of the garage door with screws (provided).
4. Replace the front cover.
PROGRAM THE DOOR SENSOR
1. Use the MyQ
App to add a new door sensor.
®
OR
1. Press and release BUTTON 1 for door 1 or BUTTON 2 for
door 2 on the Wi-Fi Hub. The yellow LED will turn solid.
2. Press the Test BUTTON on door sensor until the red LED
on the door sensor turns on. The yellow LED on the Wi-Fi
Hub will turn off when successfully programmed.
3. Press the Test BUTTON again on the door sensor and the
Wi-Fi Hub will beep once for door 1 and twice for door 2.
TEST DOOR SENSOR
Test your door sensor every 6 months or if the MyQ system
is not working as expected.
1. Press the test BUTTON on the door sensor, the LED on the
door sensor should flash and the Wi-Fi Hub should beep.
2. Perform this test 6 times. If the Wi-Fi Hub doesn't beep
each time, replace the battery in the door sensor with a
CR2450 battery.
MyQ SMART GARAGE HUB DOOR SENSOR
MODELS MYQ-G0302, 821LMB-SENSOR
To reduce the risk of SEVERE INJURY to persons:
• DO NOT enable the SMART GARAGE™ HUB or the MyQ
operating either one-piece or swinging doors. To be enabled ONLY
on a sectional door.
Top Panel
Top
of Garage
Door
Fastening
Strips
Door
Sensor
Wi-Fi Hub
BUTTON
BUTTON 1
(Settings)
BUTTON 2
CR2450 Battery
ONE YEAR LIMITED WARRANTY
The Chamberlain Group, Inc. warrants to the first consumer purchaser of
this product that it is free from defect in materials and/or workmanship
for a period of 1 year from the date of purchase.
NEED HELP?
Go to the Help section at www.mychamberlain.com or
www.myliftmaster.com, or call Chamberlain Technical Support at
1-800-528-9131.
Top Panel
of Garage Door
OR
Front
Cover
Screws
Door Sensor
Garage if
®
LED
Test BUTTON

Publicidad

loading

Resumen de contenidos para Chamberlain Group MyQ SMART GARAGE Hub

  • Página 1 ONE YEAR LIMITED WARRANTY TEST DOOR SENSOR The Chamberlain Group, Inc. warrants to the first consumer purchaser of this product that it is free from defect in materials and/or workmanship Test your door sensor every 6 months or if the MyQ system for a period of 1 year from the date of purchase.
  • Página 2 Wi-Fi émet un seul bip pour la porte 1 et deux bips pour la porte 2. The Chamberlain Group, Inc. offre la garantie au premier acheteur TESTER LE CAPTEUR DE PORTE en magasin s’appliquant à ce produit, certifié exempt de tout défaut concernant les matériaux et/ou sa fabrication, pendant une période d’un...
  • Página 3 COMPATIBILIDAD DEL SENSOR DE PUERTA ADVERTENCIA Compatible con: Para reducir el riesgo de accidentes LESIÓNES GRAVES: Modelos de MyQ Smart Garage Hub MyQ-G0301 y 821LMB. • NO activar el distribuidor SMART GARAGE™ ni MyQ con puertas ® NO compatible con: de una sola pieza o giratorias.
  • Página 4 • Conectar el equipo a un tomacorriente de un circuito eléctrico diferente al que esté conectado el receptor. • Consultar al distribuidor del producto o a un técnico idóneo de radio y televisión. ©2017 The Chamberlain Group, Inc. All Rights Reserved Tous droits réservés.

Este manual también es adecuado para:

Myq-g0302821lmb