Publicidad
Idiomas disponibles
Idiomas disponibles
1
Display
2
"Selection" buttons
3
"Set" button
4
Foot electrodes
5
"Unit" button
6
Battery compartment
4. Commissioning
Take the device out of the package and remove all the packaging material. Before
using the bathroom scales, you need to insert 3 AAA 1.5V batteries into the bat-
tery compartment. Pay attention to the polarity of the contacts. Place the product
only on a firm, even and dry surface.
Note: If you do not intend to use the device on a regular basis, please ensure that
you remove the batteries when the device is not in use.
Caution! Ensure that you do not step on the edge of the scale since it can tip over.
There is a risk of injury!
5. Selecting the weight unit
To change the displayed unit, press the "Unit" button on the back to choose
between the following options:
ST = Stone; KG = Kilograms; LB = Pound
6. Weight function
You can also use the "Weight" function to check only your weight. If you do not
want to use any of the special functions of the scales, then do not enable any
profile in the data in this case. Stand with your feet evenly apart on the scales and
do not move. Your weight is shown on the display after a few seconds. Wait until
the display stops flashing. The scales will then switch off automatically thanks to
the automatic shut-off function.
22
English
Publicidad
