mybeo 303262 Manual Del Usuario página 28

"ErrH" indicator:
The "ErrH" indicator signals that the body
values displayed are not accurate. Therefore
carry out the measurement again.
If the scale indicates an error, it is advisable to reset the device. To do this,
remove the batteries and wait for approx. 10 seconds. The batteries can then be
inserted again.
11. Cleaning and care
Follow the safety instructions strictly when cleaning. Once the device is switched
off, you can clean the surface using a damp, soft cloth.
Never use any cleaning agents, solvents or scouring agents for cleaning. Use only
a soft cloth to clean the device.
12. Safety instructions and disclaimer
Please do not try to open the device to carry out repairs or modifications. Avoid
contact with the mains voltage. Do not short-circuit the product. The device is not
waterproof. Please use it only in dry surroundings. Protect it from high humidity,
water and snow. Do not expose the device to high temperatures. Do not expose
the device to sudden changes in temperature or strong vibrations, as this could
damage the electronic components. Check the device for damage before using it.
The device should not be used if it has been subject to impact or has been dama-
ged in any other manner. Please comply with the local regulations and restrictions.
Do not use the device for purposes other than those described in the user manual.
This product is not a toy. Keep it out of the reach of children or mentally disabled
persons. Any repair or modification to the device, which is not carried out by the
original supplier, will void any warranty and guarantee claims. The device should
only be used by those who have read and understood this user manual. The speci-
fications of the device may be changed without special prior notification.
28
English