Kohler K-5848 Guia De Instalacion página 4

Faucet Centerline
Cutting Line
1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
NOTE: You may require different, more specialized tools to install
this sink to countertop materials other than wood or wood
composites.
Cut along the inside of the template line where indicated for the
countertop opening.
Position the template on the countertop. Check for adequate
clearance between the sink, faucet, backsplash and cabinet.
For multiple-bowl installations, additional support will be
required between bowls installed in countertops that are less than
1" (2.5 cm) thick.
For multiple-bowl, undercounter installations, a minimum
distance of 3-3/8" (8.6 cm) is required between cut-outs.
Trace around the template on the countertop with a pencil.
Centerlines are provided to help align the opening.
Mark the faucet hole centerline on the countertop.
Verify there is adequate clearance between the sink, faucet,
backsplash and cabinet.
Measure the thickness of the countertop.
Determine the threaded shank length of the faucet.
1007290-2-B
Faucet
Assembly
Countertop Thickness
4 Kohler Co.