Steren TEL-250 Manual De Instrucciones página 10

FORWARD CALL FROM DIALED NUMBERS
1.- Press Rd / Out (15). On screen appears last dialed number
and the conversation time.
2.- Press Rd / Out (15) until you visualize the number that you
want to forward call.
3.- Press Back (8) and automatically redial.
PAUSE
We recommend you press Pause (7) when enter a long distance
area code or when you dial an extension number. This function
enters a 2.2 seconds delay.
LOCK
If you want to block the outgoing calls, use the mechanical lock
located on the back of the phone set.
1.- Use the key (included) to turn the lock (20), to the green
point. You cannot dial any telephone number that begins with
digit "0" (long distance calls). LINE LOC appears on LCD screen.
2,. If you want to block all outgoing calls, turn the lock to the
yellow point.
3.- If you don't want to lock any call, turn the lock to the red point.
CALLER ID
INCOMING CALLS
To review incoming calls, press Up / Down (10). Incoming
numbers, date and time appears on LCD screen. To visualize
more telephone numbers, press Up / Down (10).
When you reach the end of the list or when there are no more
stored telephone numbers in memory, the message End appears
on screen.
The phone set can store up to 70 telephone numbers on The phone set can store up to 70 telephone numbers on
memory. When there are repeated numbers, the message memory. When there are repeated numbers, the message
REP appears on LCD screen. REP appears on LCD screen.
When incoming a private telephone number call, the When incoming a private telephone number call, the
message P appears on LCD screen. message P appears on LCD screen.
ENGLISH-10