Troubleshooting - Steren 208-900 Manual De Instrucciones

TROUBLESHOOTING

Problem
I cannot see any image on
the TV
The LED indicator is
blinking or is orange and
the image is not being
displayed on the TV
After a certain amount of
time, the image "freezes"
SPECIFICATIONS
Input:
Resolution:
Input Impedance:
Bandwidth:
Operation Temperature: 32°F to 104°F
Humidity:
Storing Temperature:
Audio Signal:
Sample Relation:
Audio Output:
Video Signal:
Check the connections
between the TV and the
Make sure the video switch
is set in the correct position
Make sure that the TV is in
the VIDEO setting. Check
the TV's instruction manual
Disconnect the power cable,
wait a few seconds, and
connect it again
Disconnect the power cable,
wait a few seconds, and
connect it again
12 V 1A
480p / 720p / 1080i in HDTV
480i in SDTV
75 ohms
6 MHz
20% to 90%
20°F to 140°F
MPEG-1
32 kHz, 44.1 kHz, 48 kHz
2 Vpp +- 10%
MPEG-2
ENGLISH-18
Solution
tuner