Adjusting The Hold Time Of Motion Sensor - Commercial Electric 56513241 Guía De Uso Y Cuidado

adjusting the Hold Time of Motion sensor

□
This wrap allows you to customize the hold time of the motion sensor using 3 settings: 2min, 10min, Disable.
□
Move the toggle switch on one end cap of the fixture to make your selection before activating the fixture.
nOTe: The maximum detection range is 10 feet. The maximum sensing angle is 110°. and the motion
sensor should be mounted in the down position. The detection distance is measured based
on human beings' movement towards circular tangent direction.
nOTe: recommended ceiling height of the light fixture is 10-19 feet. do not install the fixture higher
than 19 feet height when using the motion detection.
Detection Range：10ft
7
disable 10min 2min
Max:110°
Please contact 1-877-527-0313 for further assistance.
HoMEDEPoT.CoM