Publicidad
Idiomas disponibles
Idiomas disponibles
assembly instructions
1. Align first support frame with concave side
facing up. While holding support frame in
position, place second support frame (convex)
over first support frame (see figure 1).
2. Be sure screw holes are lined up. Place first
Wing Nut Screw in middle (figure 2) to secure
both support frames.
3. Place remaining wing nut screws through
frame and into bench. Be sure all wing nut
screws are tightened securely.
4. Slide adjustable legs over each leg of the
support frames. Allow the bronze "push-pins"
to "pop out" to lock into position. Adjust to
desired height. Be sure all legs are adjusted to
the same height.
Contents:
Teak Bench
Support Frame
Adjustable Legs
Wing Nut Screws
Qty
1
2
3
4
1.
2.
3.
4.
Publicidad
