Starting - Bohmer-AG W Serie Operación Manual

English
W Series

Starting

1. Turn the circuit breaker on and then connect your devices:
• AC: Connect device's plug to 3-pin plug outlet
• DC: Connect your device's black wire to the black negative terminal, the red wire to the red psositive
terminal. This can be used to charge the battery (electric start models only)
2. Turn the fuel tap to the ON position.
3. Push the choke lever to the left (closed position)
4. Turn the ignition key until the engine starts
5. Once warm push choke lever to right (open position)
Fuel tap Choke lever Ignition key
10
© Böhmer-AG