Specification; Operation; Adjusting The Exhaust; Loading Fasteners - HDX HDXBR50 Guía De Uso Y Mantenimiento

Specifications
Air consumption: 5.87 SCFM with 100 fasteners
per minute @ 90psi
Air inlet: 1/4 inch NPT
Magazine capacity: 100 fasteners , 18 gauge
Weight: 2.77 lbs
Specifications
360 Adjustable exhaust
°
Allows user to direct air away from face
.
Comfort-grip handle
For increased comfort and control .
Ergonomically engineered body
Rugged and comfortable resulting in a light-weight tool
great for extended use.
Reload indicator
Allows for quick magazine replacement.
Dual spring pusher
For consistent feed
Maximum pressure: 100 psi
Pressure range: 60 psi – 100 psi
Pin size range: 3/8 inch to 2 inch
0.079 (2mm) "
10 m m 3/8"
16 m m 5/8"
20mm 3/4"
25mm 1"
30 m m 1-3/16"
32 m m 1-1/4"
38 m m 1-1/2"
40 m m 1-5/8"
50 m m 2"
Compatible with All Generic 18 Gauge Brad Nails.
8

Operation

1

Adjusting the exhaust

The adjustable exhaust on the cap of the tool allows
users to direct the exhaust according to operator
preference. To adjust the direction, turn the exhaust cap
in the desired direction.
2

Loading Fasteners

Connect the tool to the air source.
Push down on the latch button(A). Pull back on the
magazine cover(B).
Insert a stick of fasteners into the magazine rail (C).
Make sure the pointed ends of the fasteners are
resting on the bottom ledge of the magazine when
loading. Make sure the fasteners are not dirty or
damaged.
Push the magazine cover (B) forward until latch button
pops up.
Latch button(A)
Magzine
Cover(B)
Magzine Rail(C)
WARNING: The tool may fire when it is first
connected to the air source. Always connect the
tool to the air source before loading fasteners to
prevent injury from unintended cycling. Always make
sure the tool's magazine is empty at the beginning
of each work session, before connecting to an air
source .
WARNING: Keep the tool pointed away from yourself
and others when loading fasteners. Failure to do so
could result in possible serious personal injury.
WARNING: Use only those fasteners recommended
for use with this tool. Fasteners not identified for use
with this tool by the tool manufacturer are able to
result in a risk of injury to persons or tool damage
when used in this tool.
WARNING: Never load fasteners with the workpiece
contact or trigger activated. Doing so could result in
possible serious personal injury.
HOMEDEPOT.COM
9
Please contact 1-800-514-6729 for further assistance.