Memory Full; Remote Access; Operating Your Answering Machine From Another Phone - Steren TEL-620 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7.11 Memory full

If there is less than 35 seconds recording time left in the memory, the caller will hear,
"Please complete your call within 35 seconds", after the outgoing message and before
recording tone.
If the memory becomes full during recording the machine announces, "Sorry, the memory
full", and ends the call.
When the memory is full, the machine automatically switches to the Answer Only outgoing
message.
Your new phone can store up to a maximum of 13 minutes recording or 59 messages.

7.12 Remote access

You can operate your answering machine from any phone by calling your new phone and
entering a 3 digit security PIN code.
The default PIN setting is 000. To change it, see 'Set the security PIN code'. Using a PIN
code prevents other people from accessing your answer machine and messages without
permission.

7.13 Operating your answering machine from another phone

1. Dial your telephone number. When you hear your outgoing message, press . The
machine announces, "Please enter your security code".
2. Enter your 3-digit PIN (default setting 000) within 8 seconds. You will hear, 'You have 'n'
new messages' and they will be played back.
Note: If you enter an incorrect PIN code you will be allowed one further attempt, if it is still
incorrect you will hear 'Incorrect security code' followed by a beep and then your phonet
will hang up
37

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido