Modbus Tcp - Bachmann BlueNet PDU BN3000 Instrucciones De Manejo

10.3

Modbus TCP

02.07.2019 BlueNet PDU BN3000/3500/5000/7000/7500 y BlueNet Power Unit 2
n blueNet2VariableUpperWarningTrap
– (1) Master/Inlet/Phase 1 (Phase) "Phase 1": Voltage has
reached a warning high state: 218.5 V (Threshold: 200.0 V)
– (2) Master/Combination Sensor S2 (I2C Temperature-
Humidity Sensor) "Combination Sensor S2": Humidity has
reached a warning high state: 47.6 % (Threshold: 40.0 %)
n blueNet2VariableUpperAlarmTrap
– (1) Master/Inlet/Phase 1 (Phase) "Phase 1": Voltage has
reached a critical high state: 219.7 V (Threshold: 100.0 V)
– (2) Master/Combination Sensor S2 (I2C Temperature-
Humidity Sensor) "Combination Sensor S2": Humidity has
reached a critical high state: 47.6 % (Threshold: 40.0 %)
n blueNet2SensorStatusAlarmTrap
– (1) Master/Temperature Sensor S2 (I2C Temperature
Sensor) "Temperature Sensor S2" is Lost
– (2) Master/Inlet/Phase/Fuse 1 (16A;C) "Fuse 1" is Off
n blueNet2SensorStatusOkTrap
– (1) Master/Temperature Sensor S2 (I2C Temperature
Sensor) "Temperature Sensor S2" is On
– (2) Master/Inlet/Phase/Fuse 2 (16A;C) "Fuse 2" is On
n blueNet2PduStatusAlarmTrap
– Slave-1 (Slave) "Slave-1" is Lost
n blueNet2PduStatusOkTrap
– Slave-1 (Slave) "Slave-1" is On
n blueNet2RCMSelftestResultTrap
– Maestro: RCM Self-Test finished, 1 out of 1 succeeded
n blueNet2ReconfigAgentNotification
blueNet2ShutdownAgentNotification
n
n coldStart
La función "Modbus TCP" se puede activar o
desactivar según sea necesario. Esta función está
desactivada por defecto.
Se admiten varios protocolos Modbus TCP. Las descripciones de
los protocolos se pueden descargar de la página web de Bach-
mann.
Modbus TCP V2.00
n Antes de leer los valores de una PDU se debe definir correcta-
mente el ID de la PDU, la entrada (PDU) o la salida (PU).
n No es necesario para una configuración maestra pura sin PDU
esclava.
n Código de función 0x03 (Read Holding Registers) para leer los
valores medidos.
Otras cuestiones
Modbus TCP
133