General Note; Warning And Recommendations; Stopping The Engine - Minuteman KLEEN SWEEP 45 Modo De Empleo

ENGLISH
INTRODUCTION
"MINUTEMAN" , leaders in the production of sweeping machines, are
pleased to welcome you as an owner of the "Kleen Sweep 45" sweeper
machine. We are sure that its use will give you great satisfaction. We
are also sure that while working with the Kleen Sweep 45 you will have
the opportunity to check the quality, solidness, and many applications
for its use. The "Kleen Sweep 45" sweeper machine is suitable for the
cleaning of little and large surfaces, for private, industrial and public
use. In this handbook are described and shown various operations of
installation, control and maintenance, necessary to keep your Kleen
Sweep 45 in perfect working order. These are normal maintenance
operations, which any operator can carry out with means normally
available. In the case of work requiring special use or a check of the
internal parts, You should contact your nearest MINUTEMAN service
point.
BEFORE USING THE MACHINE, CAREFULLY READ THIS
MANUAL AND KEEP IT WITHIN EASY REACH FOR FURTHER
CONSULTATION.
The observance of the instructions given in this manual, and a cautions
operator, are the best guarantee against accidents which may occur
while working with the machine. The sweeping machines produced by
MINUTEMAN are designed
requirements, but they must be used following these instructions.

GENERAL NOTE

Our company aims towards a constant perfectioning of its machines
and reserves the right to carry out modifications and improvements
whenever necessary without being to carry out the same operations on
previously sold machines .

WARNING AND RECOMMENDATIONS

Important points for the safety of all the people interested in the use of
this sweeper " Kleen Sweep 45".
• THIS SWEEPER MUST BE EMPLOYED FOR INDOOR
APPLICATIONS ONLY .
• THE SWEEPER HAS BEEN DESIGNED FOR THE CLEANING
OF DRY FLOORS.
• DO NOT WORK IN THE PRESENCE OF TOXIC POWDERS.
• DO NOT WORK IN ENVIRONMENTS WHICH MAY BE
UNDER RISK OF EXPLOSION.
• DO NOT COLLECT MATERIAL AND ALL THAT MAY LEAD
TO FIRE (FOR EXAMPLE LIGHTED CIGARETTES)
• NEVER ALLOW ANYONE TO ENTER THE SWEEPER'S
OPERATING AREA.
• NEVER
LEAVE THE
RUNNING; TURN THE ENGINE OFF AND TAKE THE KEY
AWAY.
• NEVER OPEN THE PROTECTIVE COVERS WHEN THE
SWEEPER IS RUNNING.
• MAINTENANCE OPERATIONS SHOULD ONLY BE CARRIED
OUT WITH THE ENGINE TURNED OFF.
• ONLY OPERATE THE SWEEPER FROM THE DRIVING SEAT.
• DO NOT ATTEMPT TO WORK ON SLOPES WHOSE
GRADIENTS ARE EXCEED THE VALUE SHOWN ON THE
TABLE.
• DO NOT USE THE MACHINE FOR THE CLEANING OF
OBJECTS.
• THE MAIN BRUSH MUST NOT SWEEP UP WIRES, ROPES, OR
ANY OTHER LONG MATERIAL THAT MAY GET TANGLED
WITH IT.
• DO NOT CARRY OUT ANY MODIFICATION TO THE
MACHINE WITHOUT OUR PREVIOUS AUTHORISATION.
The sweeper has not been approved for use on the public highway. P.S.
MINUTEMAN declines all responsibility for any damage to person
and/or property caused by a failure to observe the above rules or
resulting from the inappropriate or incorrect use of the sweeper.
The sweeping machines manufactured by MINUTEMAN follow the CE
directory and show the label :
6
according to the latest
SWEEPER WITH THE
PIC.1 COMMON CONTROLS
1.LEFT SIDE BRUSH CONTROL LEVER.
2.RIGHT SIDE BRUSH CONTROL LEVER.
3.MAIN BRUSH LEVER.
4.FLAP LEVER.
5.HYDRAULIC TRANSMISSION RELEASE KNOB.
PIC.2 COMMON CONTROLS
1.SWEEPER FORWARD/REVERSE SPEED CONTROL PEDAL.
2.BRAKE PEDAL.
3.PARKING BRAKE PEDAL.
PIC.3 KLEEN SWEEP 45G BRIGGS & STRATTON
CONTROLS
1.ACCELERATOR LEVER.
2.HORN PUSH BUTTON.
3.KEYSWITCH.
4.CHOKE.
5.FILTER-SHAKER PUSH-BUTTON.
6.VACUUM CUT-OFF KNOB.
PIC.4 KLEEN SWEEP 45G HONDA CONTROLS
1.ACCELERATOR LEVER.
2.HORN PUSH BUTTON.
3.KEYSWITCH.
4.CHOKE.
safety 5.FILTER-SHAKER PUSH-BUTTON.
6.VACUUM CUT-OFF KNOB.
PIC.5 KLEEN SWEEP 45E CONTROLS
1.KEYSWITCH.
2.HORN PUSH-BUTTON.
3.FILTER-SHAKER PUSH-BUTTON.
4.LOW BATTERY CHARGE WARNING LIGHT.
5.VACUUM CUT-OFF KNOB.
PIC.6 BATTERY CONNECTORS
1.MOTOR CONNECTOR.
2.FIXED CONNECTOR.
PIC.7 REPLACING THE FILTERS
1.FILTERS COVER.
2.LOCKING NUTS.
3.FILTERS HOLDER/COVER.
4.FILTERS.
PIC.8 SIDE BRUSH ADJUSTMENT
1.SIDE BRUSH ADJUSTING SCREW.
KLEEN SWEEP 45G BRIGGS & STRATTON MODEL
WARNING! For the maintenance and the correct use of the engine
carefully read the original manual supplied by "BRIGGS & STRATTON"
and strictly follow the instructions in it
STARTING THE ENGINE.
ENGINE
Nb: before starting the machine, make sure that main brush and side
brushes are raised from the ground.
Move the accelerator (n°1 PIC.3) 1/3 of the way towards the "MAX"
position.
Pull up the choke (n°4 PIC.3).
Slightly turn the key (n°3 PIC.3) clockwise.
Do not use the electric start for more than 5 seconds each time. If the engine
does not run, release the key and wait for at least 10 seconds before trying
again.
Let the engine run for at least a few seconds before letting the choke
back in.
Move the accelerator to maximum.
NB: The suction fan and hydraulic transmission unit are not engaged when
the accelerator is on the minimum position.
THE SWEEPER IS READY FOR WORKING.

STOPPING THE ENGINE

Move the accelerator to minimum position (n°1 PIC.3).
Turn key (n°3 PIC.3) to "0" position.
CLEANING THE FILTERS.
Effective operation of the sweeper depends on the state of the filters
which must be kept clean.
Iif the area to be cleaned is particularly dusty, filters must be shaken
more often, at least every 5 minutes.
The cleaning of filters can be carried out in 2 ways:
• ENGINE OFF
Turn the starting key (n°3 PIC.3) to position 1.
DESCRIPTION OF PICTURES