Reading Error Codes - Frigidaire FFTW1001PW0 Manual Del Usuario

ENGLISH

Reading Error Codes

1. Error codes can only be read while in Diagnostic Mode.
2. Most recent error code will be communicated fi rst (position 1).
3. Rotate the cycle selector knob to position 1 through 5 to retrieve the fi ve most recent error codes.
4. Error codes will sound only once. To hear the code again, rotate cycle selector away from and then back to the
desired position.
5. No beeps and no LED fl ashes signifi es no error codes.
6. To clear all error codes, press and hold the START button for 6 seconds while in Alarm Mode.
ERROR
NOTIFICATION
1 BEEP = 1
2 BEEPS = 2
3 BEEPS = 3
BEEPS
4 BEEPS = 4
5 BEEPS = 5
6 BEEPS = 6
7 BEEPS = 7
8 BEEPS = 8
9 BEEPS = 9
Error Code Example: "E5C - Voltage too high on main board"
NOTIFICATION TYPE
BEEPS
FIRST DIGIT OF ERROR CODE
SHORT PAUSE
BETWEEN EACH BEEP
10 BEEPS = A
11 BEEPS = B
12 BEEPS = C
13 BEEPS = D
14 BEEPS = E
15 BEEPS = F
16 BEEPS = G
17 BEEPS = H
18 BEEPS = I
COMMUNICATION
5 BEEPS, BRIEF PAUSE, 12 BEEPS
BRIEF PAUSE BEFORE
SECOND DIGIT
2 SECONDS
REPETITION OF COMMUNICATION SEQUENCE
SEQUENCE COMMUNICATED ONCE. REMAINS SILENT UNTIL CYCLE SE-
LECTOR IS ROTATED TO NEXT CODE. TO HEAR THE SEQUENCE AGAIN,
ROTATE THE CYCLE SELECTOR AWAY FROM AND THEN BACK TO THE
DESIRED POSITION.
4
SECOND DIGIT OF ERROR CODE
SHORT PAUSE
BETWEEN EACH BEEP
1 BEEP = 1 10 BEEPS = A
2 BEEPS = 2 11 BEEPS = B
3 BEEPS = 3 12 BEEPS = C
4 BEEPS = 4 13 BEEPS = D
5 BEEPS = 5 14 BEEPS = E
6 BEEPS = 6 15 BEEPS = F
7 BEEPS = 7 16 BEEPS = G
8 BEEPS = 8 17 BEEPS = H
9 BEEPS = 9 18 BEEPS = I