Guarantee And Service - Philips MiniVac FC6150/61 Manual De Instrucciones

ENGLISH
8

Guarantee and service

If you need information or support, please visit www.philips.com/support or read the separate
worldwide guarantee leaflet.
Troubleshooting
1 The appliance does not work
- The batteries may be low. Recharge the batteries.
2 The charging light does not go on.
- You may not have put the adapter in the wall socket properly. Put the adapter in the wall socket
properly.
- Make sure that the appliance plug is inserted into the appliance properly and that the appliance
is switched off.
- You may not have placed the appliance on the charger properly. Place the appliance on the
charger properly and make sure that the charging light goes on.
- The contact points on the appliance and/or on the charger may be dirty. Wipe them clean with
a dry cloth.
- The appliance may have been switched on while it was on the charger. Make sure that the
appliance is switched off when you charge it.
3 The vacuum cleaner does not vacuum properly.
- The dust compartment may not be attached to the appliance properly. Attach the dust
compartment to the appliance properly.
- The dust compartment may be full. Empty the dust compartment.
- The filter unit in the dust compartment may be clogged. Clean both parts of the filter unit.
4 Dust escapes from the vacuum cleaner.
- The dust compartment may be full. Empty the dust compartment.
- The dust compartment may not be attached to the appliance properly. Attach the dust
compartment to the appliance properly.
- Perhaps the filter unit is not placed in the dust compartment properly. Place the filter unit in
the dust compartment properly.
5 The vacuum cleaner does not work properly when one of the attachments is attached to
the nozzle.
- Check if the attachment is blocked. If this is the case, remove the obstruction.
- The dust compartment may be full. Empty the dust compartment.
- The filter unit may be clogged. Clean both parts of the filter unit.
6 The appliance produces a lot of noise.
- There may be solid particles in the dust compartment. Empty the dust compartment.