Technical Data - oneConcept WS-2USB Manual Del Usuario

Intended use:
This device is used as a houshold mains socket and has additional USB sockets for charging
electronic devices with a voltage of 5V DC, 2100mA. It is exclusively meant for this purpose
and must only be used for this purpose. It may only be used in the manner as described in
this manual. This product is not designed for use by persons (including children) who have
reduced physical, sensory or mental capacities or persons with no experience or knowledge,
unless they are instructed and supervised in the use of the appliance by a person responsible
for their safety.
Item # 10029659
To connect with
USB Output DC 5,0V / 2100mA
Dimensions 86 x 86mm
CAUTION: Use a voltage tester to check for given voltage on the phase conductor (L,
usually black, brown or grey) BEFORE attempting to install the new unit!
Make sure to remove the corresponding fuse before installing the socket. Only install
the socket after making sure that no voltage is given to the wires!
When in doubt, please have the installation performed by skilled personnel!
Connection terminal:

Technical Data

3-wire house electricity cord (16A, 250V AC):
Phase conductor (L), neutral conductor (N), PE protective conductor (PE)
Installation
7