Kobalt CSJ120KU Manual Del Usuario página 10

OPERATINg INSTRUCTIONS
ADJUSTMENT
1. Use the pivot release lever (B) to change the
configuration from jigsaw to reciprocating saw.
Lift up the pivot release lever (B) fully until it
cannot be lifted further. Rotate the front portion of
the tool into any of the six positions (0°, 18°, 36°,
54°, 72° and 90°). Restore the pivot release lever
(B) to secure position.
WARNINg
• To avoid being pinched, keep hands away from
the hinge when changing positions.
• To avoid tool being turned on accidentally,
remove the battery pack from the tool.
WARNINg: When adjusting the tool, only hold the foot plate (L) as shown below. NEvER hold
the pivot head.
Correct Correct
L
REPLACINg / INSERTINg THE SAW BLADE
Remove the battery before replacing the blade. Select the blade best suitable for the material to
be cut and use the shortest blade suitable for the thickness of the material. The blade should extend
past the foot plate and the thickness of the workpiece during the cut.
WARNINg! Cut Hazard. Blade breakage may occur if the blade does not extend past the foot
plate and the workpiece during the cut. Increased risk of personal injury, as well as damage to the
foot plate and workpiece, may result.
CAUTION: Keep your hands away from the lock-off button to prevent switch actuation before making
any adjustments or removing or installing attachments or accessories.
1
0°
Incorrect Incorrect
10
90°
B
Incorrect Incorrect
kobalttools.com