Dimplex Revillusion RBF30 Manual Del Propietário página 15

Electrical
To install a 240 V wall switch:
1.
Pull out the 5 wires marked L1, L2,
N, NH, and G. (black, red, white,
blue, and green).
2.
Connect the N (white) wire from the
firebox to the N (white) wire from the
main power wall switch by using a
wire connector (not included).
3.
Terminate NH (blue) with a wire
connector (not included).
4.
Connect the L2 (red) wire from the
built-in electric firebox to the L2
(red) wire from the main power wall
switch by using a wire connector.
5.
Connect the other end of the L2
(red) wire from the main power wall
switch to the L2 terminal of the main
power wall switch.
6.
Connect the L1 (black) wire from
the built-in electric firebox to the
L1 (black) wire from the main
power wall switch by using a wire
connector. (Wire connectors are not
supplied).
7.
Connect other end of L1 (black) wire
from the main power wall switch to
the L1 terminal of the main power
wall switch.
8.
Connect the G (green) wire from the
firebox unit to the G (green) wire
from the main power wall switch by
using a wire connector.
9.
Connect the L1 wire from the power
supply to the L1 terminal of the
main power wall switch.
10.
Connect the L2 (black) wire from
the power supply to the L2 terminal
of the main power wall switch.
11.
Connect the N (white) wire from the
power supply to the remaining N
(white) wire from the built-in electric
firebox by using a wire connector.
12.
Secure the two remaining G
(green) wires with a ground screw
in the main switch wall box.
13.
Insert all the wiring of the main
power wall switch into the main
switch wall box.
14.
Insert all the wiring back into the
built-in electric firebox and secure
with a cable clamp.
15.
Makes sure all connections are
tight.
15