Maintenance - Zuzi 146MET Manual Del Usuario

6. MAINTENANCE

Lamp and fuse replacement
Note: make sure that the microscope is disconnected from the net before replacing any lamp
or fuse
4. Replacement of the reflected light lamp (lamp box) (Figure 4):

Loosen the fastening screw (20) of the lamp box and open the cover, to expose the
lamp.

After replacing the lamp close the cover and tighten the fastening screw (20).
5. Replacement of the transmitted light lamp (figure 5):

Slide the precondenser (26) framework out to expose the lamp.

After replacing the lamp put the precondenser framework in its original position.
Versión / Version 1; Ene 2017
Fig.4
Halogen bulb
Fig.5
22