Steren SEG-075 Manual De Instrucciones página 18

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

How to open the strong box
1.- Enter the security code, then press C or E button.
2.- If the code is correct, the green LED lights on.
3.- If the input security code is wrong, the yellow LED blinks and will emit
a sound. If you enter a wrong code thrice, the equipment will block the
system for 30 seconds, you cannot enter more codes during this time. If
three incorrect codes are entered once again, the box will become blocked
and an audible alarm will sound.
To deactivate the alarm sequence, remove the batteries and reinsert them
once again. Remember that any codes that have been programmed will be
lost once the batteries are removed, leaving only the pre-determined default
factory code (159).
Use the override key if you forgot the security code. In this way you can
open the door just putting the key in the hidden lock and turning it to the left.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido