Kohler K-6534 Guia De Instalacion página 6

Cabinet
Max. Sink/Apron Width
Perimeter
Support
Wood Filler
Strips/Spacers
Finished Wall
Support Frame
1/2"
(1.3cm)
TOP VIEW
Max.
2. Cabinet/Support Frame Construction
CAUTION: Risk of personal injury or product damage. The
wood support and frame for the sink must sufficiently support
300 lbs. (136 kg) (approximate weight of the cast iron sink when
full and a garbage disposal installed).
Measure the size of the sink, including the apron. The cabinet
opening should equal the maximum sink/apron dimensions to
ensure a minimum gap between the sink and the cabinet.
NOTE: If the sink is not available at the time of installation, make
allowances to add wood filler strips or spacers to the cabinet
opening after the frame and before the sink is installed.
Determine if the sink will be flush with or extend slightly beyond
the front of the cabinet. The sink may extend no more than 1/2"
(1.3cm) beyond the face of the cabinet.
Construct a wood support frame to fit inside the cabinet opening.
Allow adequate clearance for the faucet assemblies and the sink
basin.
1019950-2-B
31-3/4" (80.6cm)
Clearance For
Sink Basin
Dimension "H"
Cabinet
1" x 1" (2.5cm)
Chamfer
Sink Outline
6
Clearance For
Faucet Holes
5/8" (1.6cm)
Max.
21-1/2" (54.6cm)
Support Frame
Kohler Co.