Kohler K-6534 Guia De Instalacion página 7

Support Frame
Apply Sealant
3. Support Frame Installation
Tile-In Installations
This sink is designed to be installed flush with or slightly lower
than the surrounding tile. Measure and compare the thickness of
the sink rim and tile. The rim thickness on this sink is 3/8" (1cm)
plus or minus 1/32" (1mm). Take these measurements into
consideration when determining support frame placement
(Dimension "H"). Because of the varying thickness of the tile and
sink, or if adhesive or mortar bed installation is used, you may
need to make allowances to shim the sink, or route the
underlayment as required.
Undercounter and Solid Surface Installations
Position the support frame in the cabinet opening so that when
installed, the top of the sink will be level and flush with the top
of the cabinet (Dimension H).
All Installations
NOTE: Ensure that the securing hardware will not penetrate
through the cabinet walls.
Secure the support frame to the cabinet. Position the securing
hardware to allow for easy removal should the sink need to be
removed or replaced.
Kohler Co.
Apply Sealant
Dimension "H"
Water Supply Lines
7 1019950-2-B