Special Function For Vcd And Cd; Data Disc Play Operation - Lenco DVD-305 Manual Del Propietário

ADVANCED OPERATION
8 it will play all discs. If the player's parental
level is set below 8, only discs with a
lower or equal parental level will play.
For example if the player is set to 5, only
discs with parental control ratings of 5, 4,
3, 2, & 1 will play. To play a higher rated
disc you must change the player's rating
to a higher number.
For example, consider a disc that generally
is suitable for most audiences, and is
rated as level 2 for the most part. However
in the middle there are also scenes rated
at 5 & 7 (not suitable for children).
Alternative scenes with lower rating are
included.
The player plays the highest rated scene
that the parental setting allows.
A section of the disc can have several
different sequences that vary in parental
control level. In the above example of a
disc with parental control, the player will
show a different section depending on
the parental control level set in the player's
menu. In this way parents can control the
content of films and there is no indication
that any censorship has occurred.
The meaning of the levels 1 to 8 varies
depending upon the country and the type
of content on the disc.
The parental control levels are:
Unlock
1 KID SAFE
2 G
3 PG
4 PG 13
5 PG-R
6 R
7 NC 17
8 ADULT
SPECIAL FUNCTIONS FOR VCD AND
CD
For VCD and CD discs, there is one special
function "Program Play" which makes it
different from DVD discs.
• The function is effective in PBC OFF
mode.Pressing the PROGRAM button
will activate program edit interface.
Prog-
1 [--]
2 [--]
3 [--]
4 [--]
• For how to set the program menu,
please refer to the operation of the audio
files in the media player below.
Note:
• After you have programmed the tracks,
press the PROGRAM button to switch
between program play and normal play.
• Press the OK button to exit the edit
interface.

DATA DISC PLAY OPERATION

When you insert a data disc including
audio (MP3, WMA), movie (MPEG), picture
(JPG) files into the disc slot, the following
media play window will be shown on the
screen:
Prog-
T C
1__:__ 5__:__
2__:__ 6__:__ 10__:__ 14__:__
3__:__ 7__:__ 11__:__ 15__:__
4__:__ 8__:__ 12__:__ 16__:__
1)Use the /
to select the items you want to program.
2)The items you selected will be
highlighted.
3) Input the sequence number you want
to program by the numeric buttons (0-
9,10+)on the remote control.
4) Press OK or select the "play" operation
button on the bottom area to program
playback.
15
5[--] 9[--] 13[--]
6[--] 10[--] 14[--]
7[--] 11[--] 15[--]
8[--] 12[--] 16[--]
Play Clear
T C T C T
9__:__ 13__:__
Play Clear
or the cursor button
/
C