Electrical System - Bosch TCE 422X Manual De Instrucciones

en 16 | TCE 422X | Electrical system
4.

Electrical system

The electrical system is not protected by any fuses, so if the engine, the inverter or the two-speed actuator do not
work properly, check the system by following these instructions:
1. Disconnect the tyre changer from the electrical system;
2. Disconnect the "faston" connectors of the engine;
3. Isolate the cables so to prevent a short circuit;
4. Reconnect the electrical system;
5. Verify if the electrical system works by pressing the pedal;
6. If the electrical system does not work while the engine is disconnected, substitute the invertor or the two-
speed switch. Othewise, substitute only the engine. In order to substitute the engine, follow the electrical
patterns.
|
1 695 106 342 2008-10-17 Robert Bosch GmbH