Installing The Px-850Sa Internal Sata Drive - Plextor PX-850 Manual De Instalación Y Usuario

3. Installing the
PX-850SA Internal SATA Drive
This section explains how to physically install your PX-850SA internal
Serial ATA drive in your computer. The steps are as follows:
1. Turn OFF your computer system.
2. Mount the drive into an available drive bay inside the computer
system.
3. Make the cabling connections: Serial ATA cable and power cable.
4. Turn your computer system ON.
The following pages give more details for this procedure.
NOTE: Your computer's SATA connection must support the PATA
command set. Some computer motherboards have SATA RAID
(Redundant Array of Independent Discs) chipsets that do not support the
PATA command set used by optical disc drives, or that do not have BIOS
settings to enable IDE/PATA functions. If you are unsure, consult your
motherboard manual or vendor web site for compatibility, BIOS versions,
and BIOS settings. And check the Plextor PX-850SA motherboard
compatibility listing at
http://www.plextor.com/english/support/support_compatability.html
33
PX-850 Installation and Users Manual