Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the refrigerator on solid, level floor (If don't level, it can adjust
the leveler to level.)
Attention
Don't allow the power cable pressed by refrigerator or other heavy object,
lest damaging the power cable, it may arouse suddenness.
Before connecting the power, please checking the voltage range of
refrigerator and power supply carefully.
Start using
Before it is used, make sure that the refrigerator is installed on the solid
and level floor. To understand all the attention to security matters.
1. After unsealing the refrigerator, to fix lower cover on the refrigerator.
(If the door rugged, Please refer to the adjustment instructions which
locate in the lower left corner of the right panel of Refrigerator to adjust.)
2. Connect to power supply
After connecting to power supply, the refrigerator is in the default status,
and it shows the default set temperature in factory. The refrigerator
has a Power-down memory, The first time when it is power on, then every
time will be set up at the last power-down operation.
3. Work model of the refrigerator
Human mode: You can use Temperature Control keys to set the
temperature.
4. Put the food into the refrigerator
After a period of time of the operation of electricity, the refrigerator inside
is already full cooling. Then you can put the food into the refrigerator and
start using the refrigerator.
Tips: When the temperature is set to change or put new food into the
refrigerator, It takes some time to balance the inside temperature. The
length of this period depends on the size of the temperature change, the
temperature of surrounding environment, the frequency of opening door
and the number of food, and so on.
83
Refrigerator compartment
Put the food which are short-term storage or to eat at any time in
the refrigerator comparment.
Although regulating temperature will enable average temperature
of the majority of regional cold rooms maintain between 0-10 °C, it
can not make long-term preservation of food. Therefore, refrigerator
compartment only use as a short-term food storage.
Shelf adjustment
According to the needs of food storage, you can adjust the shelf to
proper position; To facilitate the use of it or adjustment the location,
the shelf can be set to slip so that you can use and adjust it easily.
when you want to clear the shelf, please move the shelf by the
direction (l), then turn the shelf in the direction (2) for 90° until it is
Perpendicular to the original direction, pull out the shelf by the
direction (3).
Height adjustment and cleaning of rack
Lift the rack by the direction hold both the sides ,then pull it out by the
direction②. After cleaning, to install the rack by the opposite
direction. You can also adjust the position according to the height of
stored food.
GB
84
Publicidad
