Publicidad
Idiomas disponibles
Idiomas disponibles
6. Turn on the water tap to check leakage.
7. The refrigeratory is energized an used normally.
<Use of Automatic Ice Maker/ Ice& Water Dispenser>
Ice maker
Notices!
The water pipes are used in the pressure range of 30-100psi.
Water softeners may damage the ice maker and must not be used.
Please check the ice pieces in the storage box when power- off above
1h. If the ice pieces are thawing and binding together, please empty
them, because the bound ice pieces may cause Failure of the ice
system.
When the ice pieces in the storage box are binding together, you had
better to melt it with warm water rather than smash and take out them
with a sharp tool, which may damage the refrigeratory.
A. Supply of cold water
1. Choose the ice/water button on the display board, and make sure
the water indicator turns on.
2. When the water switch plate is pressed by the cup, the cold water
comes out.
3. When using the refrigeratory the first time, water does not come out
before the water tank in the refrigerator is filled up. The normal
manner to get water is pushing and holding the switch plate for 2-3
minutes.
89
4. After the water comes out, please discharge water for about 3
minutes to purge the air and smell of plastic in the water pipe.
5. When cold water is required, it's better to get some ice before
getting water.
6. When getting water, it is normal for noise of valve operation.
GB
90
Publicidad
