Operating Instructions For The Router; Installing The Router Assembly - Kobalt K7343 Manual Del Usuario

OPERATING INSTRUCTIONS FOR ROUTER

INSTALLING THE ROUTER ASSEMBLY

WARNING: ALWAYS turn the motor off and unplug the router from the power source before
making any adjustments or installing accessories. Failure to turn the motor off and unplug the
router could result in accidental starting, which can cause serious personal injury.
Selecting a cutter bit (available separately)
This router comes with 1/4
diameter shanks, respectively.
WARNING: Do not use router cutter bits that have a cutter bit diameter larger than 1-1/4 in.,
because they will not fit through the sub-base opening, could cause damage to the sub-base and
the motor, and could cause serious personal injury to the operator.
6. Removing the motor from the base
Before a router bit can be inserted, the motor and
housing must first be removed from the fixed base.
a. Use the ON/OFF toggle switch (B) to turn the motor
off. Unplug the tool from the power the source.
b. Place the router (fixed base (D)) and motor housing
(E) on a flat surface.
c. With the back of the router facing the operator,
loosen the motor clamp (P).
d. Press the coarse-adjustment knob (O) to release the
motor housing key strip (L) from the gear in the base,
while lifting the motor housing free of the base.
and 1/2 collets that accept cutter bits with 1/4
in. in.
6
B
L
O
14
and 1/2
in. in.
kobalttools.com
E
D