Maintenance; Cleaning The Scale - Etekcity ESF00+ Serie Manual Del Usuario

Maintenance

Recalibrating the Scale
If the scale has been moved or flipped upside down,
it must be recalibrated to ensure accurate results.
1. Place the scale on a hard, flat surface.
2. Step on the scale with 1 foot until digits appear
on the display. [Figure
3. The scale will show " " while calibrating, then
" " when complete.

Cleaning the Scale

• Use a slightly damp cloth to clean the surface
of the scale, followed by a soft, dry cloth to wipe
away any remaining moisture.
• Do not use chemical or abrasive cleaning agents
to clean the scale.
3.1] Then, step off.
[Figure 3.2]
Figure 3.1
Figure 3.2
EN
13