BOND MANUFACTURING BH7001-1 Manual Del Usuario página 8

STEP 3
(1) Check each part before using the
product. Make sure the gas
supply system is turned "OFF"
before assembling. See Figure I.
(2) Locate the battery and remove
the plastic cover first. Unscrew
the rubber cap of the Electric
Igniter, place a AAA battery into
the battery case. Make sure the
positive pole ("+") towards the
cap. Screw the cap back to the
battery case tightly. See Figure II.
(3) Place the lava rocks (12 kgs)
evenly in the fire bowl on the top of
the firebowl. See Figure III.
(4) Put the gas tank in the metal stand.
Make sure the gas tank sits on the
metal stand completely. Turn the
wing screw on the outer part of
metal stand clockwise to secure
the gas tank tightly. See Figure IV
& V.
See "LP (Liquid Propane) gas supply connection" for tank connection.
WARNING:
** DO NOT COVER THE IGNITION
SCREEN when placing the lava rocks
into the fire bowl. Always keep Ignition
Screen visible. This screen must be
clear and free of obstructions at all
times to insure proper operation.
The burner of the firebowl must be
covered by lava rocks completely.
Otherwise the flame may be
extinguished partially. See the Figure
CORRECT and INCORRECT for
reference.
CORRECT INCORRECT
8