Scrambler Ducati CROSS-E Manual Del Usuario página 15

ADJUSTING THE FRONT AND REAR BRAKE
The brakes require periodic adjustment.
• The brake must be at a 5 or 6-mm distance from
the handlebar grip.
• Place yourself on the vehicle to verify the distance
between the handlebar grip and the brake.
• If the distance exceeds the recommended one,
turn the washer on the brake (A) to adjust it.
To adjust the brake cable's tension, adjust the
screw (B) on the rear wheel. This will allow the
wheel to spin freely when the brake is not operated
and will allow the vehicle to stop immediately when
it is pressed.
NOTE: After each adjustment, tighten the locknut.
A
B
13