PUSH BUTTONS
• Power switch: Hold down this push button for a few seconds to turn the scooter on or off.
• Throttle: Use it to start the scooter and to accelerate.
• Brake: Hold it down to stop.
• Function: Press this push button twice to adjust speed.
Select between:
• ECO mode – Eco appears on the display. (up to 6km/h)
• COMFORT mode – D appears on the display. (up to 20km/h)
• SPORT mode – S+ appears on the display. (up to 25km/h)
• Headlight and rear light: Press the function button once to turn the headlight on. While the
lights are on, short press the function push button once to turn them off.
NOTE: The back light will blink when using the brakes.
DISPLAY
• ODO: Total km
• TRIP: Km run since the electric scooter has been turned on
• Battery level
• Speed (Km/h)
BATTERY CHARGING
NOTE: Make sure the device is turned off.
A. Open the charging port's cover located on the
right side of the vehicle and insert the 3-contact
power adapter's end.
5. Operation
14
A