Surtek CB50 Manual De Usuario Y Garantía página 14

ASSEMBLY
GROUND AND AC POWER CORD CONNECTIONS
Charger should be grounded to reduce the risk of electric shock. Charger is equipped with an
electric cord having an equipment grounding conductor and a grounding plug. The plug must
be plugged into an outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
DANGER: Never alter the AC cord or plug provided. If it will not fit outlet, have a proper outlet
installed by a qualified electrician. Improper connection can result in a risk of an electrical shock.
This battery charger is designed for use on a nominal 120-volt circuit and has a grounded plug
that looks like the plug illustrated in FIGURE 1 (A). A temporary adapter, as shown in FIGURE 1
(B) and (C), may be used to connect the charger plug to a two-pole receptacle (outlet), as shown
in FIGURE 1 (B). The temporary adapter should be used only until a properly grounded outlet can
be installed by a qualified electrician.
DANGER: Before using an adapter, as illustrated, be certain that the center screw of the outlet
plate is grounded. The green-colored rigid ear or lug extending from the adapter must be
connected to a properly grounded outlet. Make certain it is grounded. If necessary, replace
original outlet cover plate screw with a longer screw that will secure adapter ear or lug to outlet
cover plate and make ground connection to grounded outlet.
14