King Tony 9OM1371 Manual De Instrucciones página 42

Relative Button:
2
Press
The Display is zeroed , and the reading is stored
as reference value for subsequent measurements.
Press it again, the "
stored relative value will display . Press and hold
down
mode.
Auto-range & Manual Range Button:
3
Press
and the
remains in the same range it was .
In the Manual Range mode, each time you press
button , the range ( and the input range
annunciate ) increases , and a new value is
displayed.
If the meter is in the highest range, the next range
is change to the lowest range. To exit the Manual
Range mode and return to Auto Range mode,
Press and hold down
AUTO annunciate turns back on.
button to enter the relative mode.
" annunciator blinking and
button for 1 second to exit the relative
to select the Manual Range mode
annunciator turn on and The meter
for 1 seconds, the
11