Tilt Stand - King Tony 9OM1371 Manual De Instrucciones

COM Measuring Connector:
7
To connect negative lead (black test lead) for
voltage, frequency, current, resistance, diode and
continuity measurement.
10A Measuring Connector:
8
To connect positive lead (red test lead)for current
measurement below 10A.
VΩ,μA, mA, Hz,
9
To connect positive lead ( red test lead ) for voltage,
diode, frequency, microampere, milliampere and
continuity measurement.
Note:
To avoid blowing an input fuse, use the 10 A jack
until you are sure that the current is less than
400mA. When Doing Current Measurement.

Tilt stand

10
Measuring Connector:
13