Answering Calls; Dialing; Pre-Dialing; Last Number Redial - Cidco Communications D936 Manual Del Usuario

D936-937.book Page 12 Friday, August 30, 2002 10:24 AM
D936/D937 - 900MHz Cordless
USING THE D936/D937
A C
NSWERING ALLS
You can answer a call three ways:
I Press TALK / END (handset).
I
Press SPEAKER (handset or base).
I
Press FLASH (handset or base) to answer Call
Waiting calls.
D
IALING
a. Press TALK / END (handset) or SPEAKER
(handset or base).
b. Use the keypad to dial the phone number.
P -D
RE IALING
Pre-dialing allows you to enter the number and verify it
before placing the call.
a. Use the handset keypad to enter a telephone
number.
b. Check the number on the display. If the number is
wrong, press DELETE to delete the entry digit-by-
digit.
c. When the correct number is displayed, press
TALK / END or SPEAKER (handset) to place the call.
L N R
AST UMBER EDIAL
To automatically redial the last number dialed, press
REDIAL / P (handset) or REDIAL (base).
12 USING THE D936/D937
A V
DJUSTING THE OLUME
H
ANDSET
a. Press TALK / END (handset).
b. Press the or VOLUME key on the side of the
handset while the phone is in use to decrease or
increase the volume. There are four volume levels.
H R
ANDSET
a. Press the or VOLUME key on the side of
the handset while the phone is not in use.
b. The handset will ring. Press the
to decrease or increase the ringer volume until the
desired ring level is obtained. There are four
different levels of ring (off, low, medium and high).
H S
ANDSET
a. Press the handset SPEAKER key.
b. Press the or VOLUME key on the side of the
handset while the phone is in use to decrease or
increase the speaker/intercom volume. There are
four volume levels.
INGER
or VOLUME key
PEAKER