Roll Loading Procedure - Sticker Mule LMD03 Manual De Instrucciones

⚠
ATTENTION:
• If there is no label, the motor stops autonomously
after 6s.
• If the device is not in function for 10 min it switches
off automatically and returns to stand-by mode.
• To operate safely, turn off the dispenser by
pressing the power button
power jack plug from the socket before replacing
the empty roll.

7. Roll loading procedure

Before turning on the device, make sure that the roll of labels
is correctly loaded in the machine by following the following
procedure:
Insert the flange block
❻
shaft with the velcro facing
the dispenser as shown in the
picture.
10 | English
❷
and disconnect the
❼
into the