Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website: www. horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
2000 lb. (907 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2020 Horizon Global Americas Inc. - Printed in Mexico
Installation Instructions
PART NUMBERS: 24994, 77994, CQT24994
Max Tongue
Weight
Weight
200 lb. (90.7 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
1.
Limited Lifetime Warranty ("Warranty"). Horizon Global Americas Inc. ("We", "Us" or
"Our") warrants to the original consumer purchaser only ("You" or "Your") that the product
will be free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 24
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
24994NP
03-23-20
Rev. A

Publicidad

Tabla de contenido
loading

Resumen de contenidos para HORIZON 24994

  • Página 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global Americas Inc. ("We", “Us” or To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be free from material defects in both material and workmanship, ordinary wear and tear ALWAYS read, understand and follow warnings and instructions •...
  • Página 2: Equipment Required

    Hitch Type Max Gross Trailer Weight Max Tongue Weight Weight Carrying 2000 lb. (907 kg) 200 lb. (90.7 kg) Weight Distributing Hitch Illustration ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 2 of 24 24994NP 03-23-20 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 3 of 24...
  • Página 4 1. Remove taillight plastic panel – Open tailgate. Using plastic trim tools, remove plastic panel near taillights, both sides. 2. Remove taillights – Using a T25 torxbit, remove (2) screws behind the panel, both sides. Remove taillights by gently pulling rearward and unclipping wiring harness. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 4 of 24...
  • Página 5 (1) vertical screw in the upper edge behind wheel well liner, both sides. 4. Loosen lower fascia – Using a T15 torxbit, remove (3) rivets from bottom lower fascia. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 5 of 24...
  • Página 6 Figure 2. bumper beam and foam cover on the top of bumper beam. Return foam cover to vehicle owner. Not included Figure 2 ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 6 of 24 24994NP 03-23-20 Rev. A...
  • Página 7 10. Trim lower fascia –Using a tape measure, marker, and utility knife, measure, mark, and trim the lower fascia as shown in Figure 3. ���� ” ���� ���� Rearward ���� ” of Vehicle Bottom view of lower fascia Figure 3 ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 7 of 24 24994NP 03-23-20 Rev. A...
  • Página 8 11. Reinstall all fasteners, fascia, wiring harness, wheel well liners, and taillights. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 8 of 24 24994NP 03-23-20 Rev. A...
  • Página 9: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global Americas Inc. (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES vices de matières et de fabrication, exception faite de l’usure normale.
  • Página 10: Matériel Nécessaire

    Poids max. au timon de la remorque Sans répartition 2000 lb. (907 kg) 200lb. (90.7 kg) de charge Illustration de l'attelage Répartition de charge ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 10 de 24 24994NP 03-23-20 Rev. A...
  • Página 11 Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique...
  • Página 12 2. Retirer les feux rouges arrière – À l’aide d’un embout hexalobé T25, retirer les (2) vis se trouvant derrière le panneau, des deux côtés. Retirer les feux rouges arrière en tirant délicatement vers l’arrière et en détachant le faisceau de câbles. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 12 de 24...
  • Página 13 (1) vis verticale de la bordure supérieure derrière la protection de passage de roue, des deux côtés. 4. Desserrer le carénage inférieur – À l’aide d’un embout hexalobé T15, retirer les (3) rivets du carénage inférieur de la base. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 13 de 24...
  • Página 14 Remettre le couvercle en mousse au propriétaire du véhicule. Not included Figure 2 ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 14 de 24 24994NP 03-23-20...
  • Página 15 ���� ” inférieur comme illustré dans la figure 3. ���� ���� Rearward ���� ” of Vehicle Bottom view of lower fascia Figure 3 ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 15 de 24 24994NP 03-23-20 Rev. A...
  • Página 16 11. Réinstaller toutes les pièces de fixation, le carénage, le faisceau de câbles, les protections de passage de roue et les feux rouges arrière. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 16 de 24 24994NP 03-23-20 Rev. A...
  • Página 17: Garantía Limitada De Por Vida

    TechnicalSupport@horizonglobal.com GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global Americas Inc. ("nosotros", "nos" o Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Página 18: Aplicaciones

    Peso máximo de la remolque horquilla Carga de peso 2000 lb. (907 kg) 200 lb. (90.7 kg) Distribución de peso Ilustración del enganche ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 18 de 24 24994NP 03-23-20 Rev. A...
  • Página 19: Panel Final Del Vehículo

    Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 19 de 24...
  • Página 20 2. Retirar las luces traseras: Con una broca Torx T25, retirar (2) tornillos detrás del panel, en ambos lados. Retirar las luces traseras tirando suavemente hacia atrás y soltando el arnés de cableado. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 20 de 24...
  • Página 21 4. Aflojar la fascia inferior: Con una broca Torx T15, retirar (3) remaches de la parte baja de la fascia inferior. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 21 de 24...
  • Página 22 Devolver las cubiertas de espuma al propietario del vehículo. Not included Figure 2 ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 22 de 24 24994NP 03-23-20...
  • Página 23 10. Recortar la fascia inferior: Con una cinta métrica, un marcador y una navaja utilitaria, medir, marcar y recortar la fascia inferior como se muestra en la Figura 3. ���� ” ���� ���� Rearward ���� ” of Vehicle Bottom view of lower fascia Figure 3 ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 23 de 24 24994NP 03-23-20 Rev. A...
  • Página 24 11. Volver a instalar todos los fijadores, la fascia, el arnés de cables, los revestimientos del alojamiento de la rueda y las luces traseras. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 24 de 24 24994NP 03-23-20 Rev. A...

Este manual también es adecuado para:

77994Cqt24994

Tabla de contenido