Speaker Box Installation - Steren BAF-1598 Manual De Instrucciones

Speaker box installation

Make all initial connections with the power switches OFF on all equipments.
Make sure volume levels are all the way down, later you can adjust it.
1.- Connect the polarized cable to electric current, then plug to the speaker.
2.- Connect a microphone into MIC input through a 6.3mm or
Canon connector.
3.- Use Line IN connectors to plug a CD, tape, MP3 or DVD player, among
others. Or use the dock connector to plug an ipod.
4.- Turn the devices on.
5.- Set the volume level on each device. Adjust the volume control on the
speaker.
6.- Set Treble, and Bass frequencies according your needs.
Notas:
Do not place the microphone near to the speaker, may cause echo and
damages on the equipment.
You can use the 6.3mm and Canon LINE OUT connectors to plug other
amplifier.
12